Drop Down Shelf Diy
Thread the eye in the hook and eye set into the center of the front edge of the shelf.

Drop down shelf diy. Screw half of the hinge to the shelf on it s underside. Thread the hook into the wall at the pencil mark. Mark the wall with a pencil where the threaded part of the hook is located while it is hooked through the eye. Magnetic locks.
Fold the shelf up against the wall. You can fit a drop down table into the. Two to four hinged shelf supports or drop leaf supports about 15 inches long 1 inch by 2 inch board piano hinge 3 4 inch plywood sandpaper paint polyurethane tape measure level drill and bits wood screws. How to make a diy concealment shelf for hiding spare keys money passports weapons or anything else.
Place the carpenter s level on the mark horizontally and draw a 38 inch line on the wall 2 inches wider than the wall piece. Making room for a craft table in a small space can be a challenge. Http amzn to 2bwmia4 hinges. Hold the hook against the wall and hook it through the eye hook.
This side lays flat against the wall or depending on the type of hinge you choose it could have 1 inch of space. Locate and mark three studs in the wall for the installation of the drop down table with a stud finder.



























